Home

Media Converters

Filter by:
    10/100-100FX (MTRJ) LFP MM

    10/100-100FX (MTRJ) LFP MM

    Product code
    FT803UK
    Stock
    Call
    Quantity
    Please Login or Register
    10/100-100FX (SC) LFP MM

    10/100-100FX (SC) LFP MM

    PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available.

    The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function.

    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Product code
    FT802UK
    Stock
    8
    Quantity
    Please Login or Register
    10/100-100FX (SC) LFP SM 15km

    10/100-100FX (SC) LFP SM 15km

    PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available.

    The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function.

    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Product code
    FT802S15
    Stock
    18
    Quantity
    Please Login or Register
    10/100-100FX (SC) LFP SM 35km

    10/100-100FX (SC) LFP SM 35km

    PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available.

    The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function.

    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Product code
    FT802S35
    Stock
    Call
    Quantity
    Please Login or Register
    10/100-100FX (SC) LFP SM 50km

    10/100-100FX (SC) LFP SM 50km

    Product code
    FT802S50
    Stock
    Call
    Quantity
    Please Login or Register
    10/100-100FX (ST) LFP MM

    10/100-100FX (ST) LFP MM

    PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/35/50km are available.

    The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides disable or enable the LFP function.

    LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Product code
    FT801UK
    Stock
    13
    Quantity
    Please Login or Register
    10/100-100FX (WDM) (SC) SM 20km

    10/100-100FX (WDM) (SC) SM 20km

    Product code
    FT806A20
    Stock
    Call
    Quantity
    Please Login or Register
    10/100-100FX (WDM) (SC) SM 20km

    10/100-100FX (WDM) (SC) SM 20km

    Product code
    FT806B20
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000 (SC) WDM SM (60km)

    10/100/1000-1000 (SC) WDM SM (60km)

    Product code
    GT-906B60
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000LX SM (SC)

    10/100/1000-1000LX SM (SC)

    Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

    Distance Extension with High Performance and Steady Network Communications
    PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.

    Enhanced Smart Management Features
    The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.

    Easy Installation
    The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

    Product code
    GT802SUK
    Stock
    146
    Quantity
    Please Login or Register
    10/100/1000-1000LX SM WDM

    10/100/1000-1000LX SM WDM

    Product code
    GT806A15UK
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000LX SM WDM

    10/100/1000-1000LX SM WDM

    Product code
    GT806B15UK
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000SX (SC) WDM SM (15km)

    10/100/1000-1000SX (SC) WDM SM (15km)

    Product code
    GT-906A15
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000SX (SC) WDM SM (15km)

    10/100/1000-1000SX (SC) WDM SM (15km)

    Product code
    GT-906B15
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000SX (SC) WDM SM (60km)

    10/100/1000-1000SX (SC) WDM SM (60km)

    Product code
    GT-906A60
    Stock
    Call
    Quantity
    Please Login or Register
    10/100/1000-1000SX GBIC Converter

    10/100/1000-1000SX GBIC Converter

    Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

    Distance Extension with High Performance and Steady Network Communications
    PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.

    Enhanced Smart Management Features
    The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.

    Easy Installation
    The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

    Product code
    GT805A
    Stock
    79
    Quantity
    Please Login or Register
    10/100/1000-1000SX GBIC Managed Converter

    10/100/1000-1000SX GBIC Managed Converter

    WEB/SNMP/OAM Remotely Managed Gigabit Converter
    PLANET GT-90x series is a 10/100/1000Base-T to 1000Base-LX / SX Managed Media Converter developed to meet the advanced demand for further Network applications and equipped with the feature of plug and play. The GT-90x series provides all kinds of 10/100/1000Mbps Ethernet Media on RJ-45 port and offers highly stable Gigabit fiber performance. It supports conversion between 10/100/1000Base-T and 1000Base-LX / SX network, which includes SC / SFP / WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

    Friendly/Centralized/Simple Web Management Interface
    For efficient management, the GT-90x Managed Gigabit Ethernet Media Converter series is equipped with remote Web / SNMP interface. With its built-in Web-based management, PLANET GT-90x series acts as an easy-to-use, platform-independent management and configuration facility. The GT-90x series also supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. Moreover, the TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) supported helps remote device be managed and monitored by the GT-90x.

    Enhanced Management Features
    The GT-90x series can be programmed for advanced management functions such as IP address configuration, DHCP Client function, port configuration, converter configuration, 802.1Q Tag VLAN, Q-in-Q VLAN, Ingress/Egress bandwidth control, QoS and Layer protocol filter, broadcast storm and bandwidth control, to enhance bandwidth utilization.

    Easy Installation
    As the GT-90x Managed Gigabit Ethernet Media Converter series fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX / SX, the Gigabit media conversion installation is quite quick and easy simply by utilizing plug and play feature. This GT-90x series can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700, MC-1000 and MC-1500). The media converter chassis can provide DC power to GT-90x series to maintain the fiber-optic network at the central location.

    Product code
    GT905A
    Stock
    5
    Quantity
    Please Login or Register
    10/100/1000-1000SX MM (SC)

    10/100/1000-1000SX MM (SC)

    Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-802, GT-802S, GT-805A and GT-806A/B media converters support conversion between 10/100/1000Base-T and 1000Base-LX/SX network. There are SC/SFP/WDM connectors with single-mode or multi-mode media as required. The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

    Distance Extension with High Performance and Steady Network Communications
    PLANET GT-80x gigabit media converter series extends communications distance with highly Gigabit performance via fiber optic cable. The GT-80x series provides media conversion between 10/100/1000Base-T and 1000Base-SX/LX interfaces such as multi-mode LC/SC connectors (220m / 550m), single-mode LC/SC connectors (10/20/30/40/50/70/120km) and single fiber connectors (WDM, 15/60km) for various fiber optic applications.

    Enhanced Smart Management Features
    The GT-80x series provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

    Moreover, Even the web UI is not available on GT-80x, the network manager still can remotely control and monitor GT-80X by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting. PLANET GT-90x and IGT-90xT models provide TS-1000/802.3ah OAM protocol (operations, administration, and maintenance) that helps the remote GT-80x device to manage and monitor.

    Easy Installation
    The GT-80x series allows two types of the segment to connect easily. The GT-80x series can be used as a standalone unit when powered by its DC adapter or used as a slide-in module to PLANET 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R / MC-1500R48). These media chassis can assist in producing the power for the GT-80x to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX/SX, the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-80x also supports flow control and back pressure in half-duplex to eliminate packet loss.

    Product code
    GT802UK
    Stock
    142
    Quantity
    Please Login or Register
    10/100/1000Base-T to Dual 1000Base-X SFP Media Converter

    10/100/1000Base-T to Dual 1000Base-X SFP Media Converter

    PLANET GT-1205A Gigabit SFP Media Converter is upgraded by providing 2 Gigabit SFP slots, strengthened redundant function, and other features shown below:

    • DIP Switch for 3-port Operation in Gigabit Switch Mode or Redundant Mode
    • Hardware Fibre Port Redundant

     

    Product code
    GT-1205A
    Stock
    46
    Quantity
    Please Login or Register
    130W Redundant Power Supply for MC1500R

    130W Redundant Power Supply for MC1500R

    Product code
    MC15RPS130
    Stock
    12
    Quantity
    Please Login or Register
    15 Slot 19" Converter Chassis with Redundant Power Option

    15 Slot 19" Converter Chassis with Redundant Power Option

    High Density Chassis for multiple converter installation
    The MC-1500R provides 15 slots for a wide range of PLANET media converter series. It allows the connectivity of up to 15 PLANET Ethernet, Fast Ethernet, Gigabit Ethernet or VDSL2 Converters in one chassis. The 15 slots in the 19" rack saves more spaces for fiber-optic wiring, simplifies the structure and eases the maintenance of media conversion.

    Extremely Reliable Design to ensure continuous operation The MC-1500R series supports the optional hot-swappable Redundant Power System (RPS) to ensure continuous operation. Both the MC-1500R and MC-1500R48 are equipped with one 100~240V AC power supply unit and one -48V DC power supply unit, which come in the package, respectively. To enhance the reliability, they each have one spare power supply slot for that optional purpose. The continuous power systems are specifically designed to meet the demands for high tech facilities requiring the highest power integrity available.

    Plug and Play / Flexible Installation
    The MC-1500R offers flexibility in installation and cost-effective scalable solution. With an independent power supply on each slot of the MC-1500R, any converter is hot-swappable without causing an interruption to other converters. The media converters and power modules can be plugged and played anytime. Each bay of the media converter chassis can be populated with any of PLANET's media converter series, the FT, GT, VC-20x and ICS, to provide media conversion between fiber optic, phone wire and serial to copper lines.

    Product code
    MC1500R
    Stock
    15
    Quantity
    Please Login or Register
    15 Slot 19" Media Converter Chassis

    15 Slot 19" Media Converter Chassis

    Planet 15 Slot Chassis Rackmountable 240V Providing more capacity to the converters in one chassis, the MC-1500 provides 15-slot in the 19"-rack saving more spaces for fiber-optic wiring yet ease the maintenance of media conversion The MC-1500, media chassis allows the connectivity of up to fifteen PLANET Ethernet/ Fast Ethernet Gigabit Ethernet Converter in one chassis.


    Two fans with LED indicators for the system cooling and keep you informed in the system and FAN status Independent power supply in each bay of the MC 1500, you can freely install the converters without interrupting the rest of the networks. Moreover, each bay of the media center can deploy to PLANET'sconverter family like Ethernet, Fast Ethernet twisted pair to Fiber-optic conversion, Gigabit SX to LX conversion, etc

    Product code
    MC1500
    Stock
    3
    Quantity
    Please Login or Register
    IP30 Ind10/100/1000 to100/1000X SFP Media Converter (-40 to 75 De)

    IP30 Ind10/100/1000 to100/1000X SFP Media Converter (-40 to 75 De)

    Product code
    IGT-805AT
    Stock
    Call
    Quantity
    Please Login or Register
    IP30 Industrial 10/100/1000 - 2 Port 100/1000 SFP Gigabit

    IP30 Industrial 10/100/1000 - 2 Port 100/1000 SFP Gigabit

    Product code
    IGT-1205AT
    Stock
    Call
    Quantity
    Please Login or Register
    IP30 Industrial 10/100/1000 Base-T to Gigabit SFP Converter

    IP30 Industrial 10/100/1000 Base-T to Gigabit SFP Converter

    Product code
    IGTP-805AT
    Stock
    Call
    Quantity
    Please Login or Register
    IP30 Industrial 10/100/1000-GBIC (SFP) Managed Converter

    IP30 Industrial 10/100/1000-GBIC (SFP) Managed Converter

    Product code
    IGT-905A
    Stock
    Call
    Quantity
    Please Login or Register
    Mini GBIC 1000 Base-LX (LC)

    Mini GBIC 1000 Base-LX (LC)

    The Planet MGB-LX SFP-Port 1000Base-LX mini-GBIC module - 10km consists of Small Form Factor Pluggable (SFP) transceiver modules that are specifically designed for high performance integrated duplex data link over multimode optical fibre.

    These transceiver modules are compliant with the SFP Multisource Agreement (MSA) and hot pluggable. These modules offer an easy way to be installed in SFP MSA compliant ports at any time without the interruption of the host equipments operation.

    The MGB family: SFP Mini-GBIC Gigabit Ethernet modules can be installed in PLANET Switch products with SFP Mini-GBIC interface.

    The deployment distance can be extended from 100 meters (TP), up to 120 kilometers (Single-Mode, LC).

    Product code
    MGBLX
    Stock
    37
    Quantity
    Please Login or Register
    Mini GBIC 1000 Base-SX (LC) (2Km)

    Mini GBIC 1000 Base-SX (LC) (2Km)

    Product code
    MGBSX2
    Stock
    5
    Quantity
    Please Login or Register
    Mini GBIC 1000 Base-SX (LC) (550m)

    Mini GBIC 1000 Base-SX (LC) (550m)

    The Planet MGB-SX SFP-Port 1000Base-SX mini-GBIC module - 550m consists of Small Form Factor Pluggable (SFP) transceiver modules that are specifically designed for high performance integrated duplex data link over multimode optical fibre.

    These transceiver modules are compliant with the SFP Multisource Agreement (MSA) and hot pluggable. These modules offer an easy way to be installed in SFP MSA compliant ports at any time without the interruption of the host equipments operation.

    The MGB family: SFP Mini-GBIC Gigabit Ethernet modules can be installed in PLANET Switch products with SFP Mini-GBIC interface.

    The deployment distance can be extended from 100 meters (TP), 550 meters (Multi-Mode, LC), up to 120 kilometers (Single-Mode, LC).

    Product code
    MGBSX
    Stock
    354
    Quantity
    Please Login or Register
    POE (802.3af) 10/100-100FX (SC) MM

    POE (802.3af) 10/100-100FX (SC) MM

    Product code
    FTP802UK
    Stock
    1
    Quantity
    Please Login or Register
    POE (802.3af) 10/100-100FX (SC) SM 15km

    POE (802.3af) 10/100-100FX (SC) SM 15km

    Product code
    FTP802S15UK
    Stock
    Call
    Quantity
    Please Login or Register
    POE (802.3af) 10/100/1000-GBIC (SFP)

    POE (802.3af) 10/100/1000-GBIC (SFP)

    The Best Data Link and Power Sourcing Solution
    As more and more PoE PD devices need higher power input and long-distance transmission, PLANET has released a new Power over Ethernet Media Converter, GTP-80x series. With the brand-new IEEE 802.3at High Power over Ethernet technology applied, the GTP-80x series provides the following key features:

    • IEEE 802.3at / IEEE 802.3af PoE standard compliance
    • Supports a maximum of 30W output power
    • 10/100/1000Mbps duplex mode supports on 1000Base-T port
    • 1000Mbps Fiber-Optic support

    The GTP-80x series is a Single-Port, Mid-Span IEEE 802.3at High Power over Ethernet converter designed specifically to satisfy the growing demand for higher power required network equipment such as PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome, color touch-screen VoIP telephones, multi-channel (IEEE 802.11a / b / g / n) wireless LAN access points and other network devices that need higher power to function normally. The GTP-80x High Power over Ethernet converter series is an ideal solution to delivering data and power to network devices directly via the RJ-45 Port interface without the need for installing extra power outlets and electrical cabling.


    Fiber-Optic Link Capability Extends the Range of Network Deployment
    The maximum distance between the PoE PSE and PD is 100 meters. To extend the network device deployment range, the GTP-80x is integrated with Fiber interface. The GTP-80x PoE+ Media Converter is used to convert optical Ethernet signal to electrical Ethernet signal that allows two types of segments to connect easily, efficiently and inexpensively. It can convert 10/100/1000Base-T signal to 1000Base-X one and provide the diverse options of fiber connecting types to meet different network applications.

    The GTP-80x series and its fiber connecting type includes:

    • GTP-802:SC Fiber Interface with Multi-mode, Distance up to 220m and 550m
    • GTP-802S:SC Fiber Interface with Single-mode, Distance up to 10km
    • GTP-805A:LC Fiber Interface, supports Multi / Single Mode SFP module, Distance up to 120km max. (Varting on SFP module)

    With the long Fiber distance support, it still sustains the transmission performance as high as 1000Mbps. It works in high performance Store and Forward mechanism, and also can prevent packet loss with IEEE 802.3x Flow Control (Full-Duplex) and the LFP (Link Fault Pass through function) (LLCF/LLR) with the DIP Switch design. Furthermore, it can immediately alarm the administrators the issue from the link media and provide efficient solution to monitoring the network power usage.

    Quick and Easy High Power PoE Network Deployment
    The GTP-80x series provides 52V DC power over Ethernet cables -- just insert DC voltage into Cat.5/5e/6 cable, allowing the cable between the PoE splitters (POE-151S / POE-152S / POE-162S) to transfer data and power simultaneously for up to 100 meters. Then it will spilt the digital data and the power into two selectable DC outputs (5V DC / 12V DC). Thus, it reduces cables and the dedicated electrical outlets on the wall, ceiling or any unreachable place. Most of all, it also eliminates the time for installation. The high Power over Ethernet solution frees the security IP camera and wireless AP deployment from restrictions of power outlet locations.

    Product code
    GTP805A
    Stock
    21
    Quantity
    Please Login or Register
    Planet 7 Slot Desktop Converter Chassis

    Planet 7 Slot Desktop Converter Chassis

    Planet 7 Slot Desktop Converter Chassis The MC-700 provides 7 slots in the 10-rack which save more spaces for fibre-optic wiring yet eases the maintenance of media conversion. It allows the connectivity of up to seven PLANET Ethernet, Fast Ethernet, Gigabit Ethernet or VDSL2 Converters in one chassis. One fan is built in for system cooling and its status can be watched by the LED indicators in the MC-700. The MC-700 offers flexible and scalable solution for media converter installation.

    There is an independent power supply in each slot of the MC-700, so that any converter is hot-swappable without causing interruption to other converters.
    The media converters can be plugged and played anytime.Each bay of the MC-700 can be populated with any of PLANETs Media Converter series, the FT, GT, VC-20x and ICSseries Media Converter to provide media conversion between fiber optical, phone wire and serial to copper lines.

    Product code
    MC-700
    Stock
    Call
    Quantity
    Please Login or Register
    Planet Networking Power Adaptor European

    Planet Networking Power Adaptor European

    Power Adaptor for Planet Networking Products fitted with a European Style Plug-in Transformer.

    Product code
    54 9075
    Stock
    117
    Quantity
    Please Login or Register
    Planet Networking Power Adaptor USA

    Planet Networking Power Adaptor USA

    Power Adaptor for Planet Networking Products fitted with a U.S. Style Plug-in Transformer.

    Product code
    54 9076
    Stock
    55
    Quantity
    Please Login or Register
    UK Power Adaptor for (FT/GT) M/Con (5V-2.5A)

    UK Power Adaptor for (FT/GT) M/Con (5V-2.5A)

    Product code
    54 9077
    Stock
    Call
    Quantity
    Please Login or Register
    UK Power Adaptor for (FTP-802) M/Con (48V 0.4A)

    UK Power Adaptor for (FTP-802) M/Con (48V 0.4A)

    Product code
    54 9078
    Stock
    Call
    Quantity
    Please Login or Register

    To see prices and order this product, please Log In, Register Online, or Call us on 01276 405 300

    sagepay
    MC
    Safe
    Visa

    Get In Touch

    Cablenet
    AGP House, 2a Albany Park
    Frimley Road ,
    Camberley GU16 7PL UK

    Tel:01276 405300
    Email:sales@cablenet.co.uk

    Cablenet community

    Copyright ©2017 Cablenet Ltd. All rights reserved. E&oE.
    A&GP Trading Ltd trading as Cablenet. Registered in England No. 3342336