Home

POE Miscellaneous

Filter by:
    Ethernet over VDSL2 Converter (1*RJ45, 1*VDSL2/BNC Coaxial-17a)

    Ethernet over VDSL2 Converter (1*RJ45, 1*VDSL2/BNC Coaxial-17a)

    Ethernet Distance Extension via Coaxial
    PLANET VC-202A is a high-performance Ethernet-over-Coaxial extender that converts between twisted pair (UTP) and coaxial cable for every kind of IP Ethernet application. It offers the absolutely fastest data transmission speed over existing coaxial cable without the need of rewiring. On the UTP side, the VC-202A uses a modular EIA / TIA 568 RJ-45 connector that supports CAT-5/5e or above wiring with the distance up to 100 meters (328 feet). On the coaxial cable side, the VC-202A utilizes a BNC connector that supports 50ohm or 75ohm coaxial cable with the distance up to 3km. It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the coaxial cable for any type of IP network device such as IP camera, wireless access point, NVR and digital signage.


    Cost-effective / Quick Upgrade Legacy Devices to All IP Networks
    PLANET VC-202A Ethernet extender provides a quick replacement and smooth migration solution from existing analog system to full digital system. For example:
    • Upgrade analog camera to digital IP Camera
    • IP Digital Signage deployment
    • Cable TV to IPTV

    The VC-202A is equipped with one RJ-45 and one BNC port to transmit the Ethernet data over the most widespread coaxial cable. Therefore, it is very suitable and costless for upgrading legacy devices to new digital devices of IP-based network because almost every house or block on the street could use the existing coaxial cable to transmit data to the Internet and the whole building could share the Internet line in the wide network area at a minimum cost. Reusing the existing cable instead of new wire can save extra wiring cost as the coaxial cable and Ethernet line are already available. 

    Easy Installation
    There are two selectable models of the VC-202A, one is used for client side (CPE) and the other is for central side (CO). The VC-202A converter is a plug and play device without the need of configuring by software and is also compliant with all kinds of network protocols. Moreover, the rich diagnostic LEDs on the front panel show the operating status of individual port and the whole system. 

    Providing Superior Upstream and Downstream Transmission
    The VC-202A defines asymmetric (Plan 998) and symmetric mode for the transmission of upstream and downstream signals. The symmetric mode provides similar transmission rate on both downstream and upstream. On the other hand, the asymmetric mode performs higher transmission quality in short range for central side (CO). In all, when the VC-202A is in symmetric mode, it provides better upstream performance, and when it is in asymmetric mode, it gives better downstream performance. 

    Product code
    VC-202A
    Stock
    Call
    Quantity
    Please Login or Register
    IEEE802.3at/af POE Tester

    IEEE802.3at/af POE Tester

    PLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting.

    Plug and Show LED Indicators

    Simply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identifies the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second.

    Product code
    POETESTER
    Stock
    26
    Quantity
    Please Login or Register
    POE + Over Coaxial Receiver IEEE802.3

    POE + Over Coaxial Receiver IEEE802.3

    PLANET VC-203Px PoE over Coaxial Extender series is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE wireless AP and any 802.3af/at complied powered device (PD). 

    The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter anywhere on your network infrastructure. The solution contains two brand-new products:
    ■ VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
    ■ VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver

    It is a perfect solution for sending IP Video links and power to remote PoE IP camera installation that is beyond the 100 meters distance limit of Ethernet.

    Power over Coaxial
    Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.

    IEEE 802.3at/af PoE Injector and Splitter in one box design
    The VC-203PR is a Single-Port, 802.3at High Power over Ethernet Injector providing maximum up to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously through the cable to PoE PD (Powered Device). In addition, the VC-203PR also features PoE splitter function with selectable 12V/24V DC power output which makes non-PoE equipment power up as well.

    Stable Operating Performance under Difficult Environments
    The VC-203PT and VC-203PR extender is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.

    Product code
    VC-203PR
    Stock
    Call
    Quantity
    Please Login or Register
    POE + Over Coaxial Transmitter IEEE802.3

    POE + Over Coaxial Transmitter IEEE802.3

    PLANET VC-203Px series of PoE over Coaxial Extender is designed to extend IP Ethernet transmission and inject power over an existing coaxial cable for distance up to 1000m (3280ft) to PoE IP camera, PoE Wireless AP and any 802.3af/at complied powered device (PD). 

    The VC-203Px consists of a Transmitter and Receiver set which can work in pair without any power adapter and anywhere on your network infrastructure. The solution contains two brand-new products:

    ■ VC-203PT: 1-Port 10/100TX PoE PD + 1-Port BNC PoE over Coaxial PSE Extender – Transmitter
    ■ VC-203PR: 1-Port 10/100TX PoE PSE + 1-Port BNC PoE over Coaxial PD Extender – Receiver

    It is a perfect solution for sending IP Video links and power to remote PoE IP camera installation that are beyond the 100 meters distance limit of Ethernet.


    Power over Coaxial
    Based on IEEE 802.3at High Power over Ethernet and up to 25 watts of power output, PLANET PoE over coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera at long range. This feature eliminates the need for local and remote site power supplies.

    Stable Operating Performance under Difficult Environments
    The VC-203PT and VC-203PR extenders are one perfect combined solution for extending data and power transmissions over long distances for places like warehouses, parking lots, campuses, casinos, and many more. They can operate stably under temperature range from -40 to 75 degrees C which enables the users to conveniently apply the device in almost any location of the network.

    Product code
    VC-203PT
    Stock
    Call
    Quantity
    Please Login or Register
    Passive IEEE802.3 at/at Smart POE Power Converter (12V/19V/24V)

    Passive IEEE802.3 at/at Smart POE Power Converter (12V/19V/24V)

    PLANET POE-165S IEEE 802.3af/at to Passive PoE Converter convert a standard IEEE 802.3af/at PoE input powered device to 12V/19V/24V passive PoE power output device, designed to solve the issue of the difficulty in finding power outlets in outdoor places. Being able to operate under wide temperature range from -40 to 75 degrees C, the POE-165S can be placed in almost any difficult environment. The POE-165S is suitable for either DIN rail or wall mounting for the efficient use of cabinet space.

    Product code
    POE165S
    Stock
    Call
    Quantity
    Please Login or Register
    Power Over Coaxial Extender Kit

    Power Over Coaxial Extender Kit

    Product code
    VC-205-KIT
    Stock
    Call
    Quantity
    Please Login or Register

    To see prices and order this product, please Log In, Register Online, or Call us on 01276 405 300

    sagepay
    MC
    Safe
    Visa

    Get In Touch

    Cablenet
    AGP House, 2a Albany Park
    Frimley Road ,
    Camberley GU16 7PL UK

    Tel:01276 405300
    Email:sales@cablenet.co.uk

    Cablenet community

    Copyright ©2017 Cablenet Ltd. All rights reserved. E&oE.
    A&GP Trading Ltd trading as Cablenet. Registered in England No. 3342336